Daywalker
05.09.2003, 03:09
@dvb.matt
Was bedeutet die Meldung GOP#xxxx has no PTS ? Das bekomme ich momentan bei Aufnahmen von MTV2 Pop. Wofür steht eigentlich PTS??....PlayTimeSequence????
Und tataaaa Logfile... :D
X v0.81.3 (26.08.2003)
=== session infos ===
=> working with collection 0
-> write output files to :
C:\
-> 4 cutpoint(s) defined (use Frame number for cuts)
=> File 0: C:\PCTVSat Aufnahmen\Videos\MTV2 Pop Channel-030902-195500 1.mpg (2176417792 bytes)
=> File is MPEG-2 PS/SS (Video/Audio PES)
=> demux
-> found PES-ID 0xE0 (MPEG Video)
-> found PES-ID 0xC0 (MPEG Audio)
GOP#331 has no PTS
GOP#550 has no PTS
-> cut-in @ new vframe 0 / new Timecode 00:00:00.000
-> video basics: 480*576 @ 25fps @ 0.6735 (4:3) @ 10000000bps, vbvBuffer 72
dropping useless B-Frames @ GOP#732 / new Timecode 00:00:00.000
GOP#1083 has no PTS
GOP#1953 has no PTS
-> cut-in @ new vframe 8626 / new Timecode 00:05:45.040
dropping useless B-Frames @ GOP#1980 / new Timecode 00:05:45.040
GOP#2110 has no PTS
GOP#2137 has no PTS
GOP#2998 has no PTS
GOP#3155 has no PTS
GOP#3190 has no PTS
video: fr/ct/1p/cg/og/dg 34820/1262/4167/2902/0/0
videolength: 34820f @ 00:23:12.800
avg. nom. bitrate 6999680bps (min/max: 6642000/7617200)
set first sequence_header bitrate to 7617200bps
===> new File: C:\MTV2 Pop Channel-030902-195500 1.mpv
--> MPEG Audio (0xC0)
Audio PTS: first packet 00:00:00.029, last packet 00:33:20.021
Video PTS: start 1.GOP 00:05:51.560, end last GOP 00:33:18.360
-> adjusting audio at video-timeline
=> src_audio: MPEG-1,Layer2,48000Hz,jstereo,192kbps,CRC @ 00:00:00.000
audio frames: wri/pre/skip/ins/add 58033/0/0/0/0 @ 00:23:12.792 done..
===> new File: C:\MTV2 Pop Channel-030902-195500 1.mp2
summary of created media files:
.Video: 34820 Frames 00:23:12.800 C:\MTV2 Pop Channel-030902-195500 1.mpv
Audio 0: 58033 Frames 00:23:12.792 0/0/0/0 C:\MTV2 Pop Channel-030902-195500 1.mp2
=> 1252071462 bytes written...
@Lucike
Danke für den Attachment MOD! 8)
Was bedeutet die Meldung GOP#xxxx has no PTS ? Das bekomme ich momentan bei Aufnahmen von MTV2 Pop. Wofür steht eigentlich PTS??....PlayTimeSequence????
Und tataaaa Logfile... :D
X v0.81.3 (26.08.2003)
=== session infos ===
=> working with collection 0
-> write output files to :
C:\
-> 4 cutpoint(s) defined (use Frame number for cuts)
=> File 0: C:\PCTVSat Aufnahmen\Videos\MTV2 Pop Channel-030902-195500 1.mpg (2176417792 bytes)
=> File is MPEG-2 PS/SS (Video/Audio PES)
=> demux
-> found PES-ID 0xE0 (MPEG Video)
-> found PES-ID 0xC0 (MPEG Audio)
GOP#331 has no PTS
GOP#550 has no PTS
-> cut-in @ new vframe 0 / new Timecode 00:00:00.000
-> video basics: 480*576 @ 25fps @ 0.6735 (4:3) @ 10000000bps, vbvBuffer 72
dropping useless B-Frames @ GOP#732 / new Timecode 00:00:00.000
GOP#1083 has no PTS
GOP#1953 has no PTS
-> cut-in @ new vframe 8626 / new Timecode 00:05:45.040
dropping useless B-Frames @ GOP#1980 / new Timecode 00:05:45.040
GOP#2110 has no PTS
GOP#2137 has no PTS
GOP#2998 has no PTS
GOP#3155 has no PTS
GOP#3190 has no PTS
video: fr/ct/1p/cg/og/dg 34820/1262/4167/2902/0/0
videolength: 34820f @ 00:23:12.800
avg. nom. bitrate 6999680bps (min/max: 6642000/7617200)
set first sequence_header bitrate to 7617200bps
===> new File: C:\MTV2 Pop Channel-030902-195500 1.mpv
--> MPEG Audio (0xC0)
Audio PTS: first packet 00:00:00.029, last packet 00:33:20.021
Video PTS: start 1.GOP 00:05:51.560, end last GOP 00:33:18.360
-> adjusting audio at video-timeline
=> src_audio: MPEG-1,Layer2,48000Hz,jstereo,192kbps,CRC @ 00:00:00.000
audio frames: wri/pre/skip/ins/add 58033/0/0/0/0 @ 00:23:12.792 done..
===> new File: C:\MTV2 Pop Channel-030902-195500 1.mp2
summary of created media files:
.Video: 34820 Frames 00:23:12.800 C:\MTV2 Pop Channel-030902-195500 1.mpv
Audio 0: 58033 Frames 00:23:12.792 0/0/0/0 C:\MTV2 Pop Channel-030902-195500 1.mp2
=> 1252071462 bytes written...
@Lucike
Danke für den Attachment MOD! 8)